Fender® 4-Way Pickup Selector Switch for Telecaster Mod

Fender® 4-Way Pickup Selector Switch for Telecaster Mod
(Please Read the Details)

Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender® offers this high-quality, 4-position switch with knob and mounting hardware.

Telecaster players have long debated the merits of having their pickups wired in parallel vs. in series. In the traditional parallel wiring configuration, pickup output is relatively consistent across all three positions. A Telecaster with its pickups wired in series differs in that when both pickups are on at the same time, the combination produces a fatter tone and higher output. This switch allows players to have both wiring options at once.

The resulting pickup combinations are:
Position 1: Bridge Pickup (standard Tele)
Position 2: Bridge & Neck Pickups in Parallel (standard Tele)
Position 3: Neck Pickup (Standard Tele)
Position 4: Bridge & Neck Pickups in Series (fatter tone than position 2 and more output than positions 1, 2, or 3)

Notes:
Other position options are also possible depending on the wiring style.
The ground must be lifted from the rhythm pickup cover and an additional group wire added to maintain its shielding capability. Players with reverse-wound, reverse polarity pickups such as Fender's Texas Specials receive the additional benefit of hum cancellation in positions 2 and 4.

Measurement and Specs:
Body Depth 1.34 in. (put mm)
Body Width 0.504 in.
Item Length 1.878 in.
Mounting Hole Center to Center A 1.63 in.
U.S. Screw Number 6
U.S. Thread Major Diameter 0.138 in.
U.S. Thread Pitch 32 tpi.

Please send a message before placing your order.
We specialize in custom guitar wiring and hand-wound pickups.

Please let us know if you have questions or clarification.
You can also check our website for more wiring guide info.
Feel free to send a message and we will reply asap.
Thank you!