Orange Drop Capacitor Sprague®(Please Read the Details)
A capacitor lets the tone control roll off the treble response, progressively warming the tone. The higher the value, the more bass output f...
Bourns® US ⅜” Standard Length Mini-Size Potentiometer (Split Shaft)(Please Read the Details)
Premium quality and long life mini-size guitar pots. Designed to provide low noise and top of the line...
Treble Bleed Circuit (Please read the details)The Treble Bleed Circuit is responsible for maintaining a uniform tone at different volume levels. This is especially helpful when playing with overdr...
Gavitt® Cloth Wire Vintage Style Pre-tinned Pushback Guitar Wire 22AWG (per foot)(Please Read the Details)
Genuine and high-quality Gavitt Vintage Style Pre-tinned cloth PushBack Guitar Wire.
A clo...
Pure Tone® Multi-Contact Output Jack Made in USA(Please Read the Details)
If you are looking for top-of-the-line jacks for your instrument, this is it!
Best quality Pure Tone Jack MONO and STEREO ...
Bourns® Push Pull Potentiometers 3/8” Shaft US specs(Please Read the Details)
Premium quality and long life guitar push-pull pots.This series of Bourns Potentiometers are specifically crafted for ...
CTS® Push Pull US ⅜” Standard Length Full-Size Potentiometer(Please Read the Details)
The CTS Push-pull pots are typically used for wiring mods like split-coil, series-parallel, in-phase / out-of-...
CTS® Premium US ¼” Short Length Full-Size Potentiometer (Split Shaft)(Please Read the Details)
CTS short length pots (¼” or 6.35mm) are perfect for pickguard and control plate mounting like Strat,...
Switch Tip for Strat Switch Style US Size(Please Read the Details)
High quality and durable switch knobs / switch tips for guitar pickup selectors. Good replacement for missing parts.
This will f...
Mallory Capacitors(Please Read the Details)
Yellow capacitors with 5% tolerance for better precision. Made in USA by CDE, a leading manufacturer of high-quality capacitors. Tubular metalized pol...
CTS® Premium US ⅜” Standard Length Full-Size Potentiometer(Please Read the Details)
The CTS standard length pots (⅜” or 9.5mm) are a safe choice and will fit most US-made guitars.
CTS is a top of ...
CTS® Metric ⅜” Standard Length Full-Size Potentiometer(Please Read the Details)
This series of Metric CTS high-quality guitar potentiometers made specifically for Asian guitars. This will fit most...
Copper Shielding - Long (20cmx25cm)
This long copper shielding tape is ideal for use with guitar body cavity. For pickguards, you may want to use the the rectangular version instead.
Note: Usually...
Top Hat Knob, Gold with Gold Cap, Gibson Style made in USA
(Please Read the Details)
Gibson style top hat knob. Fits fine-knurled pot shafts like CTS US.
Sold per piece.
Options:VolumeTone
Color: G...
Alpha® Metric ⅜” Standard Length Push-Pull Potentiometer (Split Shaft)(Please Read the Details)
Typically used for wiring mods like split-coil, series-parallel, in-phase/out-of-phase sounds, and mo...
Greasebucket Tone Control Circuit(Please Read the Details)
The Greasebucket Tone Control Circuit is a cool way to roll off the highs and lows in your guitar while preventing your tone from getting ...
Switchcraft® Output Jack Made in USA (Open Frame)(Please Read the Details)
Genuine and high-quality Switchcraft guitar MONO and STEREO output jacks.
Use this to replace your noisy, grounded and sc...
Switchcraft® Output Jack Made in USA (Enclosed Jack)(Please Read the Details)
Use this to replace your noisy, grounded and scratchy output jacks. This premium quality and US-made parts are perfec...
Switch Tip for Switchcraft® Toggle Switch Style US SizeS (Please read the details)
Premium quality and durable switch knobs for 3-way toggle guitar pickup selectors. Usually found in ES-335, Jazz...
Specialty Wire PTFE 22AWG Silver-Plated Wire(Please Read the Details)
This stranded hookup wire is our recommended wire if you want a thin but though 22AWG wire.
The insulation used is not the typ...
Precision Resistor(Please Read the Details)Premium quality Metal Film Precision Resistors for guitar and bass wiring mods.
These are not typical resistors. The precision is +/- 1% of its indicated ...
Metal Knobs Flat Top for 6.35mm Solid Shaft(Please Read the Details)
This metal knob version accepts the bigger 6.35mm or 1/4" solid shaft pots like CTS US and Bourns Full-size.
Premium quality me...
Hex Nut and Washers(Please Read the Details)
Hex Nuts and Washers and flat washers for US potentiometers with 3/8" thread diameter like CTS and Bourns. This will also fit Switchcraft jacks.
Hex N...
Epiphone® 3-way Pickup Selector Toggle Switch(Please Read the Details)
High-quality Epiphone pickup selector straight type, short and tall toggle switches. This guitar switch is typically used fo...
CRL® Pickup Selector Switch (Made in USA)(Please Read the Details)
Premium quality CRL guitar pickup selector switches are famous for durable, noise-free reliability and easy wiring since the earl...
Bourns® Custom US ⅜” Standard Length Potentiometers (Low Torque)(Please Read the Details)
This is not a typical Bourns guitar pots. This Custom series of Bourns Potentiometers are specifically de...
Alpha HH 5-way pickup selectorIbanez Style 2502N (Please read the details)
This is not a typical 5-way pickup selector switch. This specific model is based on the Ibanez 2502N switch Used for HH du...
AlNiCo Magnet BarUS grade for Humbucker Pickups(Please Read the Details)
Sold per piece.
Dimensions: 62.1mm x 12.7mm x 3.175mm (2.44" x 0.5" x 0.125")
Options: II, III, IV, V, & VIII
******...
La Bella is proud to re-introduce one of the best-selling electric guitar sets of all-time, “The Bender” strings. Given today’s trend in capturing vintage tone, we recognize the need for a guitar s...
Copper Shielding - Rectangular (20cmx25cm)
This rectangular copper shielding tape is ideal for use with pickguards on instruments including the stratocaster, telecaster, precision bass, and jazz b...
